Edid Contents - Dell E773c Series Service Manual

RELATIVE PLACEMENT OF TYPICAL COMPONENTS
6. Convergence adjustment
A. Produce a magenta crosshatch on the display.
B. Adjust the focus for the best overall focus on the display.
Also adjust the brightness to the desired condition.
C. Vertical red and blue lines are converged by varying the angle between the two tabs of the 4
pole magnets on the PCM assembly. (See above diagrams)
D. Horizontal red and blue lines are converged by varying the two tabs together, keeping the angle
between them constant.
E. Produce a white crosshatch pattern on the display.
F. Vertical green and magenta lines are converged by varying the angle between the two tabs of
the 6-pole magnets.
G. Horizontal green and magenta lines are converged by varying the two tabs together, keeping
the angle between them constant.

4-3 EDID CONTENTS

x0 x1 x2
00: 00 FF FF
10: 01 0D 01
20: 0E 48 4C
30: 01 01 01
40: 13 00 36
50: 38 38 31
60: 45 4C 4C
70: 00 32 A0
x3 x4 x5 x6
FF FF FF FF
03 68 20 18
A4 42 00 31
01 01 01 C3
E6 10 00 00
41 4E 30 30
20 45 37 37
1E 46 0B 00
Purity Magnets
6-pole Convergence Magnets
4-pole Convergence Magnets
Deflection Yoke
x7 x8 x9 xA
00 10 AC 05
78 2E 8A A9
59 45 59 61
1E 00 20 41
1E 00 00 00
30 35 0A 00
33 63 0A 20
0A 20 20 20
11
xB xC xD xE
D0 35 30 30
A1 54 46 99
59 81 80 71
00 20 30 10
FF 00 39 4B
00 00 FC 00
20 00 00 00
20 20 20 00
xF
30
24
4F
60
32
44
FD
**