Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the trigger. Release the trigger to stop
Reversing switch action
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
This tool has a reversing switch to change
the direction of rotation. Slide the reversing
switch to the A position (appear
ing) for clockwise rotation or slide to the B
marking) for counter-
The overload protector automatically cuts out to break the circuit whenever heavy work is
prolonged. Wait 20 - 30 seconds before resuming operation.