Bass Control - Audiovox Rampage ACD-85 Owner's Manual

OPER OPERA A A A A T T T T T ING INSTRUC OPER ING INSTRUC ING INSTRUC ING INSTRUCT T T T T IONS
OPER OPER ING INSTRUC
27(FAR SIDE) 18, 35
31
REL
11
22
23
38
39
17
DIM
1
12 32
1 1 1 1 1
POWER ON/OFF AND DIM BUTTON
Momentarily press this button to turn the unit on; the
icon appears on the display. Press the button
TUNER
for at least 2 seconds to turn the unit off. If the ignition
switch is "on", the unit will also turn on automatically
when a compact disc is inserted, or if any other front
panel control button is pressed. While the unit is on,
each time the button is momentarily pressed and
released, the VFD display panel backlighting intensity
will change from low-to-medium-to-high, and then
back to low, thereby providing three different intensity
settings.
2 2 2 2 2
AUDIO CONTROL (VOL +/- ) BUTTONS
To increase the volume level, press the + button. The
volume will increase and the level will be shown on
the display panel from a minimum of VOL 00 to a
maximum of VOL 100. To decrease the volume level,
press the - button. The display will automatically
return to the normal indication 5 seconds after the last
volume adjustment or when another function is
activated. These control buttons are also used in con-
junction with the Select (SEL) button
bass, treble, balance and fader levels as described
4 5 6 7
in , , and .
3 3 3 3 3
SELECT (SEL) CONTROL BUTTON
This button is used to select the audio function
6 6 6 6 6
(volume, bass, treble, balance, or fade) whose
IONS IONS
IONS IONS
33,34
(FAR SIDE) 21(FAR SIDE)
19
AF TA TP
(AUX)
PTY MTL EON
TAPE IN
MODE
LO/DX
SCAN
LOUD PAUSE SCAN REPEAT
DISP BAND 1 2
29 26, 40 24, 41 25, 42
28 8, 10
3
to adjust the
20 16
ST
PRESET
LOUD
CD TUNER
UALIZER
MUTE
MONO
SHUFFLE DISC-DN DISC-UP
3 4 5 6 AMS
36 37
14
15
setting is adjusted using the AUDIO CONTROL
2
buttons . Pressing the SEL button once will set the
unit for volume adjustment (VOL will appear on the
display panel) and an audible beep will occur. Press-
ing the button additional times will select bass
adjustment (BAS will appear on the display panel),
treble adjustment (TRE on the display), balance
(BAL), or fader (FAD). The display will automatically
return to the normal indication 5 seconds after the the
last adjustment or when another function is activated.
NOTE: Regardless of the Preset Equalizer setting,
whenever Base, Treble, Balance or Fader
settings are adjusted, the Equalizer setting
will always return to FLAT mode.
4 4 4 4 4

BASS CONTROL

To adjust the bass level (Equalizer function inactive),
first select the Bass mode by pressing the SEL button
so the BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode,
press the VOL - button to decrease the bass
response, or the VOL + button to increase it as
desired. The level will be shown on the display panel
from a minimum BAS -10 to a maximum of BAS +10
(BAS 00 indicates flat response). The display will
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
30
9
OPEN
2
3
4
SEL
5
6
7
13