Panther H6240 User Manual

Panther H6240 User Manual

Hydraulic table cart

Advertisement

Introduction

The Model H6240 Hydraulic Table Cart (Figure 1)
will move and raise material weighing up to 600
lbs. to a maximum comfortable working height of
29
" above the floor.
1
4
The Model H6240 was carefully packed when it
left our warehouse. If you discover this hydrau-
lic table cart is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Figure 2 - Inventory.
A. Cart (Not Shown) ....................................... 1
B. Handle ........................................................ 1
C. Foot Pedal .................................................. 1
D. Hex Bolts M8-1.25 x 40 .............................. 2
E. Hex Bolts M8-1.25 x 20 .............................. 1
This table cart is not a toy. DO NOT allow
children to use this cart. Serious injury may
occur if this cart is used incorrectly.
Hydraulic Table Cart
MODEL H6240
Figure 1. 600 lb. Capacity hydraulic table cart.
B
Figure 2. Inventory.
C
E
D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H6240 and is the answer not in the manual?

Questions and answers

Summary of Contents for Panther H6240

  • Page 1 Introduction The Model H6240 Hydraulic Table Cart (Figure 1) will move and raise material weighing up to 600 lbs. to a maximum comfortable working height of ⁄ " above the floor. The Model H6240 was carefully packed when it left our warehouse. If you discover this hydrau-...
  • Page 2 ASSEMBLY Slide the lifting pedal into the pedal shaft, and insert the M8-1.25 x 20 hex bolt through the hole in the side of the pedal shaft and into the lifting pedal (Figure 3). Place the handle in the handle sockets and secure with the M8-1.25 x 40 hex bolts (Figure 3).
  • Page 3 REF PART # DESCRIPTION PH6240001 TABLETOP PH6240002 PIVOT PIN PR06M EXT RETAIN RING 16MM PH6240004 SCISSOR LIFT PH6240006 WHEEL PH6240007 BASE PH6240008 PIVOT PIN PH6240009 HYDRAULIC JACK PB23M HEX BOLT M10-1.5 X 100 PH6240011 BUSHING PH6240012 FRONT WHEEL PW04M FLAT WASHER 10MM PN02M HEX NUT M10-1.5 PH6240015...

Table of Contents