Chassis; Adjusting The Front Disc Brake; Adjusting The Rear Disc Brake - Yamaha WR250R Service Manual

Hide thumbs Also See for WR250R:
Table of Contents

Advertisement

EAS21140

CHASSIS

EAS21170

ADJUSTING THE FRONT DISC BRAKE

1. Check:
Brake lever free play "a"
G
Out of specification → Adjust.
Front brake lever free play
5.0–8.0 mm (0.20–0.31 in)
2. Adjust:
Brake lever free play
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Loosen the locknut "1".
b. Turn the adjusting bolt "2" in direction "a" or
"b" until the specified brake lever free play is
obtained.
Direction "a"
Brake lever free play is increased.
Direction "b"
Brake lever free play is decreased.
c. Tighten the locknut "1".
a a
EWA13050
WARNING
A soft or spongy feeling in the brake lever
can indicate the presence of air in the brake
system. Before the vehicle is operated, the
air must be removed by bleeding the brake
system. Air in the brake system will consid-
a
b b
1
2
3-20
erably reduce braking performance.
ECA13490
CAUTION:
After adjusting the brake lever position,
make sure there is no brake drag.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS21200

ADJUSTING THE REAR DISC BRAKE

1. Check:
Brake pedal position "a"
G
(distance "a" from the top of the rider footrest
to the top of the brake pedal)
Out of specification → Adjust.
Brake pedal position
11.5 mm (0.45 in)
2. Adjust:
Brake pedal position
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Loosen the locknut "1".
b. Turn the adjusting bolt "2" in direction "a" or
"b" until the specified brake pedal position is
obtained.
Direction "a"
Brake pedal is raised.
Direction "b"
Brake pedal is lowered.
a
b
2
1
c. Tighten the locknut "1" to specification.

CHASSIS

a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wr250x

Table of Contents