ELECTRICAL
6. Reinstall the starter motor to the engine.
ELECTRONIC THROTTLE
CONTROL (ETC) SWITCH
The Electronic Throttle Control (ETC) system is
designed to limit the engine RPM in the event of a
mechanical problem with the throttle mechanism.
The ETC switch is mounted independently of the
throttle actuator lever inside the throttle block
assembly. This is a normally open switch, and is held
in the closed position by throttle cable tension. In the
event of a mechanical problem in the throttle
mechanism (cable tension is lost), the switch contacts
open, connecting the CDI grey wire from ground,
limiting engine RPM to 1500.
Electronic Throttle Control (ETC) Switch
(Cast Aluminum Throttle
Housing)
A
Ill. 1
5.14
ETC Micro Switch
Button
Electronic Throttle Control
Throttle is
ETC Switch is
Open
Closed. Connec-
tion from Grey to
Black.
Throttle is
ETC Switch Open.
Closed
NO connection
from Grey to
Black.
In the Event of
With cable slack
Cable Slack
the ETC is open,
there is NO con-
nection from grey
to black, the En-
gine RPM is limit-
ed to 1500 RPM.
Throttle Open
Throttle Closed