Transmission Service - Polaris SCRAMBLER 50 Service Manual

TRANSMISSION SERVICE

NOTE: Engine removal is required to service
transmission components. Refer to beginning of
this chapter for removal instructions.
1. Drain the oil from the gear case.
2. Remove the transmission cover and gasket.
Main Axle
Primary Drive Assy.
2.10
Drain Plug
Primary Drive
Axle Assy.
3. Remove the washer and the driven clutch gear.
4. Remove the drive axle assembly. Inspect for signs
of wear.
5. Remove the bolt and washer to aid removal of the
bearing and the primary drive assembly.
Primary Drive Assy. Bearing
Transmission Cover
NUT DRIVE SPROCKET
CIRCLIP
WASHER
BEARING
MAIN AXLE
Drive Shaft (Transmission) Exploded View
ENGINE
Bolt
Washer
BEARING
OIL SEAL
CIRCLIP
BEARING
DRIVE AXLE
ASSY.
WASHER