Advertisement
Quick Links
© Panduit Corp. 2001
Module Installation
1. Orient module and Adapter as shown
above.
Module Removal
1. Press down on tab while pushing upward on the module.
The Adapter can fit into a 25mm
or 1.00" square knock out in any
metal or plastic panel that is
1.5mm - 2mm (.06" - .08") thick.
The knock out could be located
in a furniture panel, raceway, or
desk as long as it meets the
previous criteria.
10500 West 167th Street
Orland Park, Illinois 60467
PN260
INSTALLATION INSTRUCTIONS
2. Align groove on module with notch on
Adapter. Swing module downward.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
NETWORK CONNECTIVITY GROUP
Technical Support: 866-405-6654
Fax: 708-444-6993
Page 1 of 1
Australian Furniture Adapter
PART NUMBER: CMAA1**-X
CMAA1
3. Snap into place.
2. Remove module from Adapter.
Web site: www.panduit.com/ncg
E-mail: netconnsupport@panduit.com
Printed in U.S.A.
Advertisement
