Figure 1.8 Configuration Diagram Of The Primequest 2000 Series Operation Management; Figure 1.9 Svim Setup Flow - Fujitsu PRIMEQUEST 2400E3 General Description Manual

CHAPTER 1 Product Overview
1.5 Software technologies

FIGURE 1.8 Configuration diagram of the PRIMEQUEST 2000 series operation management

ServerView Installation Manager (SVIM)
SVIM allows the user to easily perform the setup operations, including the OS installation during the initial
installation or reconfiguration of a server.
SVIM much simplifies steps for hard disk RAID configuration and driver selection to the extent that even
users without expertise can implement a setup easily and securely in a short time. Setting up using the SVIM
results in a stable operation early, at the beginning of an operation.
Automatic HDD
RAID configuration

FIGURE 1.9 SVIM setup flow

Item
You can configure RAID using configuration tool called
WebBIOS. This tool is started after power-on and start of OS.
SVIM can simplify setup for a RAID. You only need to enter
information such as the RAID type, combination of HDDs, and
spares, even if without having the knowledge on how to
operate the RAID configuration tool.
33
Description
CA92344-0534-07