# Calculation Range; Error Messages - Canon F-710 Instruction

Scientific calculator

## Calculation Range

The allowable result display in the lower line is 10 digits for a mantissa
and 2 digits for an exponent. However, calculations are internally
performed with a range of 12 digits for a mantissa and 2 digits for an
exponent.
Calculation range:
-99
1 x 10
~ 9.999999999 x 10

### Error Messages

1. ARGUMENT– A function does not have the correct number of
arguments.
2. DIVIDE BY 0
A. You attempted to divide by 0.
B. In statistics, n=1.
3. DOMAIN– You specified an argument to a function outside the
valid range. For example:
A. For
: 0 or y<0 and x not an add integer.
x
B. For y
: y and x=0;y<0 and x not an integer.
C. For
: x<0.
D. For LOG or LN : X
E. For TAN : x=90, -90, 270, -270, 450, etc.
F. For SIN-1 or COS-1
G. For nCr or nPr : n or r are not integers
H. For x! : x is not an integer between 0 and 69.
4. EQUATION LENGTH ERROR- An entry exceeds the digit limits
(88 for Entry Line and 47 for Star or Constant Entry lines); for
example, combining an entry with a constant that exceeds the limit.
5. OVERFLOW-
| |
A.
1E10, where
(function).
B. Displaying when the entered value, executing result, memory
sum x exceed
6. STAT–
A. More than 9999 statistical data point.
B. Statistical data point x, where
C. [2nd][ -] to remove the only data point.
D. Displaying when execute [
E. Calculating – x,
one data point.
7. SYNTAX– The command contains a syntax error: entering more
than 23 pending operations or 8 pending values; or having
misplaced functions, arguments, parentheses, or commas.
99
, and 0
0.
|
|
x
>1.
is an angle in a trig, hyperbolic, or R
|
|
X
>9.999999999x10
-]/[CSR] but without data.
xn, or
xn-1 with no data points or
- 10 -
0.
99
.
|
|
x
1E64
P
xn-1 with