Xerox 7800 User Manual page 221

3. Push the stapler to the right as shown.
4. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
5. Remove any loose staples or other debris from inside the finisher.
6. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
7. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
® ®
Xerox WorkCentre 7800/7800i Series Color Multifunction Printer
Maintenance
221
User Guide