Ink Ribbon Replacement - Sharp CS-4194H Operation Manual

INK RIBBON REPLACEMENT

1. Remove the paper roll from the calculator. (Tear
the paper and remove it from the print
mechanism by using
2. Set the power switch to OFF.
Make sure that the print wheel has stopped.
3. Remove the printer cover by sliding it towards
the back of the calculator. (Fig. 1)
4. Remove the used ribbon.
5. Install the new ribbon.
6. With the black side of the ribbon facing upwards,
place one of the reels on the reel shaft on the
right. (Fig. 2) Make sure that the reel is securely
in place.
7. Thread the ribbon around the outside of the
metal guides. (Fig. 3)
8. Take up any slack by manually turning one of
the reels.
9. Replace the printer cover.
10. Replace the paper roll.
.)
Printer cover
Fig. 1
Reel
Reel shaft
Ink ribbon
8
Ink ribbon
Fig. 2
Fig. 3