Haier HWD1500 User Manual page 14

0 P E_TI 0 N AL N STR UCT J0 N $
Warning - To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
¢ontrom
Pane_
©
1. Cycle Selector
To set a desired wash program, turning the knob will light the cycle selected on
the control panel. Wash cycles are: Cotton, Synthetic, Wool, Silk, Quick & Sport.
Once selected you could press the "Start/Pause" button to start operation.
2. Start/Pause Button
After a cycle, options, spin speed,temperatureand dry cycle is selected,pressthis
button to begin wash. During a wash cycle, pressthis button to pauseoperation.
Pressagain to resumeoperation. If dry cycle is selected,the wash load will go into
drying program after the wash is done.
3. Spin Speed Selection
By pressing this button, the required spinning speed can be selected. You could
choose from Max; High; Medium; Low to No Spin.
The maximum speed will vary when a different program is selected.
4. Temperature Button
Pressbutton to selectwash/rinse temperature. Selectionchoice is hot/cold;
warm/warm; warm/cold; cold/cold. Thewash/rinse temperaturewill vary when a
different program is selected.
5. Drying Button
To startthedry cycleimmediatelyafter thewash cycle, pressthis button.An indicator
will light up showing its activation.When the unit goes in the dry modethe light will
flash.To cancelthe program pressthe Start/Pausebutton beforethe cycleis complete.
Pressing Drying buttonagain will cancelthe dry program and turn off the light.
NOTE: Drying cycleis notavailable in all wash cycles.
13