Repair Instruction - Philips HR1869/30 Service Manual

REPAIR INSTRUCTION

1. Remove the Bottom
First you have to remove the anti slip ring.
2. Change the driving shaft
First you have to remove the bottom (see point 1.)
Remove the cap, use a small screw driver.
3. Change the motor
First you have to remove the driving shaft (see point 2.)
Then remove the 3 caps and the 3 screws on the top of housing.
Open all 4 screws (T15) to remove the Bottom.
Anti slip
ring
Turn both screws to the left direction,
and hold the motorschaft on the back side.
HR1869/30
HR1869/35
6-7