Location Of Controls - Panasonic KX-TA824 User Manual

Location of Controls

DIALING BUTTONS WITH BACKLIGHT
9
(KX-T7731/36): Dialing buttons are backlit
when (1) you receive a call, (2) during a
conversation, or (3) when BGM is activated
at your phone.
10
TRANSFER: Used to transfer a call to
another party.
HOLD: Used to place a call on hold.
11
SP-PHONE (Other than KX-T7750): Used
12
for the handsfree operation.
MONITOR (KX-T7750 only): Used for
handsfree dialing. You can monitor the
other party's voice handsfree.
NAVIGATOR KEY
13
(KX-T7730/7731/7735/7736):
Used to adjust the volume and the display
contrast, or select desired items.
VOLUME KEY (KX-T7720/7750): Used to
adjust the volume.
Programmable Feature (PF) Button:
14
Used as an One-Touch Dialing button
(Button assignment is required).
Flexible Outside (CO) Line Button:
15
Used to make or receive an outside call.
Pressing this button seizes an idle outside
line automatically. (Button assignment is
required.) Also used as feature buttons.
(Button assignment is required.)
PAUSE: Used to insert a pause during
16
dialing.
MESSAGE: Used to leave a message
17
waiting indication, or call back the party
who left the message waiting indication.
Message/Ringer Lamp: The Message/
18
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PBX, the lamp
flashes. When the other ringing patterns
are set in your PBX, the lamp may not
flash. (e.g., S-Double, Call Waiting
Tone1).
When someone has left you a message,
the lamp is lit continuously.
– 9 –