Company Confidential - Nokia RM-164 Service Manual

Programming is completed when
The product type designator and MCU SW version are displayed in the status bar.
Firmware Update window and then choose File→Close Product .
vi Close the
Request file.
2. Create a
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i To connect the phone with
ii Choose Tools→Certificate Restore .
iii To choose a location for the request file, click Browse.
Page 3 –52
Flashing Completed message is displayed.
Phoenix , choose File→Scan Product .

COMPANY CONFIDENTIAL

Copyright © 2007 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-164
Issue 1