Panasonic DBS 576 Technical Manual page 53

Built-In ACD Supervisor Guide
Setting
Notice
576-3.6-521 (ACD 4.0)
1. Press the ON/OFF key and PROG key.
2. Select a vacant FF key.
3. Press REDIAL key.
4. Select to feature code to assign.
Feature Description
ACD-1 Log-In/Out Key
ACD-1 Work Unit Key
ACD-1 Unavailable Key
ACD-2 Log-In/Out Key
ACD-2 Work Unit Key
ACD-2 Unavailable Key
ACD Silent Monitor Key (two touch) 77 + desired extension (DBS 576 only)
ACD Silent Monitor Key (one touch) 77 (DBS 576 only)
Zip Tone Mode ON/OFF Key
5. Press HOLD key to store.
6. Press ON/OFF key to end.
1. If an FF key selected in setting 2 is not vacant (Pre-assigned), the
previous setting will be erased automatically.
2. To confirm an FF key assignment, press ON/OFF-CONF-FF
key.
3. To delete an FF key assignment, skip procedures 3 & 4 of setting
procedure.
DBS 576 (USA) issued October 2000
Fixed Feature Code
+ (additional digits to program into key)
#80
#81 + (Work Unit 01-20)
#82
#85
#86 + (Work Unit 01-20)
#87
73
Section 521
49