Controls; Power On/Off Switch O / I; Service Button; Steam Button B - Bosch TES 501 SERIES Operating Instructions Manual

Hide thumbs Also See for TES 501 SERIES:
Table of Contents

Advertisement

Available languages

Available languages

en

Controls

Power on/off switch O / I

The power on/off switch O / I (9) is used to
switch the appliance on or to switch it off
completely (power supply off).
Important: Before switching off, run the
rinse programme or use the service button
(12) to switch off.
A

Service button

When the service button (12) is pressed
briefly, the appliance rinses and switches
off. If the service button (12) flashes, the
service programme needs to be run. Press
and hold the service button (12) to start
the service programme. The service button
(12) flashes while the service programme is
running and turns off when the programme
has ended.
B
Steam button
Press the steam button (11) to generate
steam for frothing milk.
C
Start button
Press the start button (10) to start preparing
a drink. Press again during drink prepara­
tion to stop the dispensing process early.
TES501_1DE.indb 25

LED display

The various LEDs light up and flash to indi­
cate the following:
D
lights up The water tank is empty and
needs to be refilled.
D
flashes
The water filter is exhausted
and needs to be replaced.
E
lights up The bean container is empty
and needs to be refilled.
F
lights up The steam valve needs to be
opened or closed.
F
flashes
Depending on the setting,
steam or hot water is coming
out of the milk frother.
G
G
lights up When
the "coffee strength" rotary
knob, the symbol lights up
while ground coffee is being
dispensed.
H
lights up The drip tray is missing or has
not been inserted correctly.
Insert the drip dray.
H
flashes
The trays are full. Empty the
trays and reinsert them.
I
lights up The brewing unit door is open.
Close the door.
I
flashes
Remove and clean the brew­
ing unit.
25
is selected using
TES501.. 08/2011
05.08.2011 15:34:45

Advertisement

Table of Contents
loading

Table of Contents