Searching The Desired Picture; Basic Search; Search By Time And Date - Mitsubishi Electric DX-TL5000EZ User Manual

Searching the desired picture

Basic search

This function is used to search the start point of needed picture.
This unit is equipped with 5 search functions (Search by Time
and Date, Search by Alarm List, Find data storage location,
Search by Book Mark, and Search by Motion). In this section,
the common search methods, search by time and date and
search by alarm list, are described.

Search by Time and Date

This item is used to search recording picture by specifying
date, hour, minute, second, and camera number. The search
result is displayed in still frame playback. When searching for
1 camera number, the search result is displayed in the single
screen display. When searching for 2 or more camera numbers,
it is displayed in SPLIT16 screen.
User Menu
1 Search
2 Search by Time and Date
1. To input the time and date to be searched manually,
step
select "Manual" and then set the date, month, year,
hour, minute, and second.
• To input the start and end points of recording,
select "Start" and "End" respectively.
2. Set the camera numbers to be searched.
step
3. Select "Search."
step
4. To playback the searched picture, press either the
step
PLAY button or the PAUSE button.
5. To stop playback or still frame playback, press the
step
STOP button.
To change the source device to be searched, set the
desired device in the <Select Source Device> (User
Menu Search Select Source Device).
To display the single screen display of the desired camera
number when the search result is displayed in the SPLIT16
screen, press the desired camera number button.
When there is no recording of the set time, the picture of
the closest time and date for the set camera number is
displayed in still frame.
When the multiple recorded data of the same date and
time are existed, execute search by time and date more
than once until the desired picture is searched.
Depending on the recording condition, search by time and
date function may not operate correctly.
When you change the display from single to split or from
split to single during still frame playback, the recording
picture may not be existed at that point or picture may not
be displayed depending on the selected camera number
or timing of displaying the still frame playback picture.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
18