Power-Airflow Flap, Wide-Angle Louvres And Auto-Swing - Daikin ARXG35E3V1B Service Manual

Main Functions
1.2 Power-Airflow Flap, Wide-Angle Louvres and Auto-
Swing
Power-airflow The large flap sends a large volume of air downwards to the floor. The flap provides an optimum
control area in cooling, heating and dry mode.
Flap
Heating Mode
During heating mode, the large flap enables direct warm air straight downwards. The flap
presses the warm air above the floor to reach the entire room.
Cooling Mode
During cooling mode, the flap retracts into the indoor unit. Then, cool air can be blown far and
pervaded all over the room.
Wide-Angle The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Louvres
Auto-Swing The following table explains the auto-swing process for heating, cooling, dry and fan :
Outline of 3-D Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room. This function is effective for starting the air conditioner.
Airflow
Detail of the When the horizontal swing and vertical swing are both set to auto mode, the airflow become 3-D
Action airflow and the horizontal swing and vertical swing motions are alternated. The order of swing
motion is such that it turns counterclockwise, starting from the right upper point as viewed to the
front side of the indoor unit.
COMFORT The vertical swing flap is controlled not to blow the air directly on the person in the room.
AIRFLOW Mode
16
Vertical Swing (up and down)
Heating Cooling, Dry
30˚
10˚
75˚
40˚
(R3293)
The airflow rate is set to AUTOMATIC.
The airflow rate has the upper limit (M tap) in heating mode.
The latest command has the priority between POWERFUL and COMFORT AIRFLOW.
Heating Cooling, Dry
5˚
80˚
(R3297)
Fan
5˚
80˚
(R3294) (R3295)
(R3298)
SiBE04-809
Horizontal Swing
(right and left)
35˚ 35˚
(R3296)
(R1024)
Function and Control