Power Amplifier (200W+200W)
WP-1200B/G
Rated Power Output 200 W+200 W (4 Ω), 120 W+120 W (8 Ω)
•
•
Switching possible between stereo, mono and BTL modes.
•
Newly developed servo control system with superior radiation capability.
•
VI limiter and Crow-Bar circuit used to prevent trouble from occurring.
•
Class H circuitry improves output efficiency.
•
Simple and rational circuit design ensures stable operation.
•
Highly balanced design ensures reliability, durability and tone quality.
Dimensions
480
SPECIFICATIONS
120 W + 120 W / 8 Ω, 20 Hz ~ 20 kHz, less than 0.3 % THD
Rated Power Output
200 W + 200 W / 4 Ω, 40 Hz ~ 20 kHz, less than 0.3 % THD
400 W / 8 Ω, 20 Hz ~ 20 kHz
Bridged Output
20 Hz ~ 20 kHz, +0 dB, –0.5 dB at 4 Ω, 1 W output
Frequency Response
Total Harmonic Distortion
Less than 0.3 %, 40 Hz ~ 20 kHz
(4 Ω Load)
Less than 0.1 %, 1 kHz
IM Distortion (SMPTE, CCIF, DIM100) Less than 0.3 %
Crosstalk
–60 dB or less (at 20 kHz)
Voltage Gain
27.2 dB at 1 kHz
+4 dB at rated output / 4 Ω
Input Sensitivity
Input Impedance
40 kΩ
Input C.M.R.R.
Greater than 40 dB at 1 kHz
Greater than 100 dB at 1 kHz, 8 Ω load
Damping Factor
Greater than 100 dB below 8 Ω rated
SN Ratio (DIN)
Source Voltage/Frequency
220 ~ 240 V AC (50 Hz) (G)
Switches and Controls
Power switch, Input Sensitivity Potentiometer
Stereo/Mono/BTL selector
LED
Power indicator, Peak indicator, Protection indicator
Connectors & Terminals
Input Connectors: famale XLR half lock type x 2
Dimensions
480 (W) x 88 (H) x 393 (D) mm
Weight (approx.)
11.8 kg
420
480
88
14
Unit: mm
TRS phone jack x 2
P O W E R A M P L I F I E R S
Front Panel
Peak level indicator (A)
Protect indicator (A)
Power ON/OFF switch
Input level
control (A)
Rear Panel
Mode selector
(Stereo/Mono/BTL)
Peak level indicator (B)
Input level
Protect indicator (B)
control (B)
Power ON indicator
Output terminals
Ground terminal
AC power
cord
Rear panel
protection
angle
Input connectors