Other Speaker Setup Options - Panasonic SC-HT530 Operating Instructions Manual

Other speaker setup options

∫ Attaching to a wall
You can attach all of the speakers to a wall.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
‰3.0–4.0 mm
4.0–7.0 mm
Wall or pillar
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
[HT840] (Front speakers only) [HT880] (Front and surround speakers)
≥When mounting the front or surround speakers to a wall, we recommend using a string (not included) to prevent it from falling (➜ page 5).
≥Use of optional speaker cables is recommended for wall-mounted front or surround speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
e.g.
Front and surround speakers [HT530]
In this position, the
speaker will likely
fall if moved to the
left or right.
∫ Fitting speaker stands
[HT840] Front speakers [HT880] Front and surround speakers)
(Except
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.
Front and surround speakers [HT530]
e.g.
5 mm,
pitch 0.8 mm
Attach the stands to
Plate thickness plus 7 mm to
these metal screw holes.
10 mm
30–35 mm
‰7.5–9.4 mm
Center speaker
Move the speaker
so that the screw is
in this position.
(not included)
60 mm
Speaker stand
(not included)
Front speakers
Front and surround speakers [HT880]
180 mm
[HT840]
366 mm
175 mm
RQT7978
29