Advertisement
Quick Links
C E I L I N G - M O U N T E D S P E A K E R S
Flush-Mounted
Ceiling Mount Speaker
WS-TN13E
Ceiling-Mounted Speaker
Conventional ceiling-mounted speaker
Speaker
Sound is too
loud to hear.
WS-TN13E
Speaker
Tone level and quality
are even whether in
a position directly
under or away from
the speaker.
Pursuing uniformity of tone quality
A special diffuser radiates sound in both the downward and
horizontal directions. While optimizing the sound level directly
under the speaker, the diffuser delivers sufficient sound levels
in the higher frequencies to positions away from the speaker,
thus ensuring the delivery of clear sound.
Simple, easy installation
Wide-directional design is employed to cover a wide area with
SPECIFICATIONS
Model No.
Standard Inputs
6 W, 3 W, 1 W
Input Impedance
1.67 kΩ, 3.3 kΩ, 10 kΩ,
Sound Pressure Level*
94 dB (1 m/ 1 W)
Frequency Response
120 Hz -15 kHz
Speaker Type
12 cm cone speaker
Operating Temperature Range
–20˚C to +50˚C
Dimensions
134 mm (W) x 215.5 mm (H) x 88.5 mm (Internal Component Height)
Weight (approx.)
600 g
Required Opening
ø150 mm - 160 mm
Finish
Black polystyrene
*Output level is defined in accordance with JISC5531 and differs from the security warning (Signal No. 2) level.
SPECIFICATIONS
Model No.
Dimensions
ø180 x 10.5 mm
(Exposed height)
8.5 mm
Weight (approx.)
60 g
Finish
Integrated PP
Integrated white (Munsell 10Y9/1)
Speaker Panels
WS-TP10E
WS-TP12E
WS-TP13E
WS-TP14E
Speaker
Sound level is
too low to hear.
Tone quality and level are almost flat.
Speaker
WS-TN13E
WS-TP10E
75 g
Frame: ABS resin
Integrated white (Munsell 10Y9/1)
Net: Punched aluminum
Integrated white (Munsell 10Y9/1)
a small number of speaker units, thus ensuring cost
reductions during installation work. Furthermore, quick
connection terminals are employed, ensuring one-touch
connection of cables without using any tools. The speaker
panel (option) is of a spring type, and all you have to do is to
hang it in the desired place.
Economical efficiency during remodeling
When remodeling your shop, you can change the interior
atmosphere just by replacing the speaker panels.
Speaker Volume Controllers
•
6 W/30 W/60 W transformer type. Broad wattage range adapts
flexibly to wattage fluctuations while work is underway.
•
5-level sound volume adjustment. Addition of –18 dB level
allows use in quieter environments.
•
One-touch snap on insulator. For easier connecting and
insulation.
•
Equipped with protective back cover to provide a safer
working environment.
•
Uses one-touch snap on terminals equipped with release buttons.
Requires solid copper wire cabling ø0.8 mm - ø1.6 mm.
*
SPECIFICATIONS
Model No.
Standard Inputs
0.5 W - 6 W
Input Impedance
20 kΩ - 1.67 kΩ
Volume Adjustment
5-level: OFF, 1 (–18 dB), 2 (–12 dB), 3 (–6 dB), 4 (0 dB) reduction
Dimensions
70 mm (W) x 120 mm (H) x 49 mm (D)
Weight (approx.)
210 g
Finish
Milk White Plate: Aluminum brushed finish
WS-TP12E
WS-TP13E
70 g
Frame: ABS resin
Integrated white (Munsell 10Y9/1)
Net: Expanded metal net
Integrated white (Munsell 10Y9/1)
Speaker Volume Controllers
WZ-VC106E/F
(0.5 W ~ 6 W)
WZ-VC130E/F
(0.5 W ~ 30 W)
WZ-VC160E/F
(0.5 W ~ 60 W)
WZ-VC106E/F
WZ-VC130E/F
0.5 W - 30 W
0.5 W - 60 W
20 kΩ - 330 Ω
20 kΩ - 167 Ω
WS-TP14E
80 g
Frame: Aluminum frame
Base color: Satin finish
Net: Punched aluminum
AV ivory (Munsell 7.9Y6.8/0.8)
WZ-VC160E/F
Advertisement
