Table of Contents
Advertisement
Quick Links
Plate for wire installation 6363
•
A kit for wire installation with all the necessary pieces for all kinds of detectors.
General
6363 is a kit that consists of the following:
•
A metal plate with pre-drilled screw
holes for all kinds of detectors / bases.
•
A clamp (to fix the plate to a wire)
•
Two screws 3.5x10 mm
•
Two screws 3.5x12 mm
•
Two screws 4x15 mm
•
Two screws 4x27 mm
•
Two screws 4x40 mm
•
Two spacers 6.4 mm Ø 9.5 / 4.5
•
Two spacers 25.4 mm Ø 6.4 / 4.5
Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
info@mfstech.com • www.panasonic-fire-security.com
Fire alarm system
Product applications
The kit is used with any of the Panasonic
heat or smoke detectors plugged in a base,
allowing the user to make a wire installation
of the detector.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Panasonic 6363
Summary of Contents for Panasonic 6363
- Page 1 • A kit for wire installation with all the necessary pieces for all kinds of detectors. General 6363 is a kit that consists of the following: • A metal plate with pre-drilled screw holes for all kinds of detectors / bases.
-
Page 2: Technical Data
6363 Plate for wire installation. (Detector and base are not included.) Dimensions: Weight (g) ~160 Material Aluzink ® All technical features and data are subject to changes without notice, resulting from continuous development and improvement. Product Leaflet MEW00350 Type number...
Need help?
Do you have a question about the 6363 and is the answer not in the manual?
Questions and answers