Audio And Video Connections; Step 4 Ac Mains Lead Connection; Step 5 Preparing The Remote Control - Panasonic SC-PT880 Operating Instructions Manual

Dvd home theater sound system
Table of Contents

Advertisement

Available languages

Available languages

3

Audio and video connections

Basic setup example
SCART cable
(not included)
e.g. [PT580]
Main unit (rear)
§1 This connection will also enable you to play TV audio through
your home theater system (
remote control). Select the appropriate audio out (e.g. Monitor)
on the TV.
To improve picture quality, you can change the video signal output from
the SCART (AV) terminal to suit the type of TV you are using.
≥ Select "S-VIDEO", "RGB 1" or "RGB 2" from "VIDEO OUT – SCART"
in VIDEO menu (
18).
≥ When both the HDMI cable and SCART cable are connected, there
will be no RGB output from the SCART (AV) terminal.
Other video connection
[\\\\\\\\\\\HDMI\AV\OUT\\\\\\\\\]
This connection provides the best picture quality.
Connect the HDMI cable (not included) from the HDMI AV OUT
terminal on the main unit to the HDMI AV IN terminal on your TV.
≥ If your TV is not ARC compatible, make the extra audio connection.
≥ Set "VIDEO PRIORITY" to "ON" (
≥ Set "VIDEO FORMAT" in Menu 4 (HDMI) (
VIERA Link "HDAVI Control"
If your Panasonic TV is VIERA Link compatible, you can operate your
TV synchronising with home theater operations or vice versa (
Using the VIERA Link "HDAVI Control
ARC (Audio Return Channel)
If the TV is ARC compatible, audio from the TV can be sent to this unit
via the HDMI cable without the need to make an extra audio connection.
≥ Refer to the operating instructions of the TV for details.
[Note]
≥ Please use High Speed HDMI Cables that have the HDMI logo (as
shown on the cover).
≥ Non-HDMI-compliant cables cannot be utilised.
≥ It is recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
≥ For TV with more than one HDMI terminal, refer to the operating
instructions for the TV to determine which terminal to connect to.
Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
Other audio connections
[\\\\\\DIGITAL\AUDIO\IN\OPTICAL\\\\\\]
When the optical digital audio cable
decode Dolby Digital audio.
Connect the optical cable (not included) from the DIGITAL AUDIO
IN OPTICAL terminal on the main unit to the OPTICAL OUT terminal
on your TV.
[Note]
After connecting with the optical digital audio cable or HDMI
make settings to suit the type of audio from your digital equipment
(
10).
§2 Refer to the operating instructions of the respective devices for the
settings necessary to output the audio.
§3 Only Dolby Digital and PCM can be played with this connection.
[\\\\\\\\\AUX\\\\\\\\]
Use this connection when the TV does not have an OPTICAL OUT
terminal or when the DIGITAL AUDIO IN OPTICAL terminal on this unit
is being used by the STB.
Connect the audio cable (not included) from the AUX terminal on
the main unit to the AUDIO OUT terminal on your TV.
8
8
§1
TV
AV1
AV
10, Selecting the source by the
18, HDMI menu).
14).
TM
").
§2, 3
is connected, this unit can
§2, 3
§2, 3
Set Top Box (cable/satellite/Blu-ray Disc Player, etc) connection
Use this connection when you want to output the original surround audio
from your STB, etc. to this unit.
Connect the optical digital audio cable (not included) from the
DIGITAL AUDIO IN OPTICAL terminal on this unit to the OPTICAL
OUT terminal on your STB.
≥ If the DIGITAL AUDIO IN OPTICAL terminal is already in use for the
TV audio, reconnect the TV audio to the AUX terminal using an audio
cable.
[Note]
If you have various sound sources (such as Blu-ray player, DVD
recorder, VCR, etc.), connect them to the available inputs on the TV and
the TV output should then be connected to the SCART (AV), AUX, HDMI
AV OUT or DIGITAL AUDIO IN OPTICAL terminal of the main unit.
step 4
AC mains lead connection
To household mains socket
AC mains lead (included)
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.1 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the main
unit.
[Note]
The included AC mains lead is for use with the main unit only.
Do not use it with other equipment. Also, do not use cords for other
15,
equipment with the main unit.
step 5
Preparing the remote control
Batteries
Insert so the poles (r and j) match those in the remote control.
R6/LR6, AA
Replace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
≥ Use alkaline or manganese batteries.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
cable,
Do not:
≥ mix old and new batteries.
≥ use different types of batteries at the same time.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor (
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to the left and right
AC IN
Main unit (rear)
Press in and lift up.
4), avoiding obstacles.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-pt580

Table of Contents