C
I
OMPLETING THE
NSTALLATION
Connecting the Connection Cord
20
E-
FJM_IM_DB98-31792_E_6.10.10.indd 20
The indoor unit is powered from the outdoor unit via the connection cord.
1
Remove the screw on the electrical component box and remove the cover
plate.
2
Route the connection cord through the side of the indoor unit and connect
the cable to terminals; refer to the figure below.
3
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
4
Reassemble the electrical component box cover, carefully tightening the
screw.
Between Indoor and Outdoor Connection Cord
Specifications
Power Supply (Single Phase)
Power Supply Max/Min(V) Connection Wire
1.0mm 2
220-240V~
or more
±10%
/50Hz
(H07RN-F,
3 wires)
CAUTION
K eep the power cable and the connection cord in a steel pipe to
protect them against liquids, outside impacts and so on.
Home
Communication
Earth Cable
server
Cable
0.75~
0.75~
1.25mm 2
Ø 1.6mm
1.25mm 2
(2 wires)
(H07RN-F,
(2 wires)
2 wires)
2010-6-10 9:53:47