Service; Data Plate; Troubleshooting Chart - Bosch HBL53 Use And Care Manual

Hide thumbs Also See for HBL53:
Table of Contents

Advertisement

Available languages

Available languages

Service

How to Obtain Service or Parts
To reach a service representative, see the contact
information at the front of the manual. Please be prepared
with the information printed on your product data plate
when calling.

Data Plate

The data plate shows the model and serial number. Refer
to the data plate on the appliance when requesting service.
The data plate location varies based on the oven model
and door hinge type:
Single oven with bottom hinge: left hand side of door
trim.
Single oven with side hinge: side opposite the door
hinge.
Double oven with bottom hinge: left hand side of door
trim of the lower oven cavity.

Troubleshooting Chart

Oven Problem
Oven door is locked and will not
open, even after cooling.
Oven is not heating.
Oven is not cooking evenly.
Baking results are not as
expected.
Food takes longer to cook than
expected.
Food is overcooked.
Oven light is not working properly.
Oven light does not turn off.
Cannot remove lens cover on
light.
Oven is not self-cleaning properly.
English 23
Possible Causes and Suggested Solutions
Turn the oven off at the circuit breaker and wait five minutes. Turn breaker back on.
The oven should reset itself and will be operable.
Check circuit breaker or fuse box to your house. Make sure there is proper electrical
power to the oven. Be sure oven temperature has been selected.
Refer to cooking charts for recommended rack position. Check "Getting the Most
Out of Your Appliance" for tips and suggestions.
Refer to cooking charts for recommended rack position. Check "Getting the Most
Out of Your Appliance" for tips and suggestions. Adjust oven calibration if
necessary. See "Oven Temperature Offset" under "Setting Menu Options".
The oven is carefully calibrated to provide accurate results. However, the
temperature can be offset if food is consistently too brown or too light. See "Oven
Temperature Offset" under "Setting Menu Options".
The oven is carefully calibrated to provide accurate results. However, the
temperature can be offset if food is consistently too brown or too light. See "Oven
Temperature Offset" under "Setting Menu Options".
Replace or reinsert the light bulb if loose or defective. Touching the bulb with fingers
may cause the bulb to burn out.
Check for obstruction in oven door. Check to see if hinge is bent. Oven light has
been turned on: press the oven light button to turn off.
There may be soil build-up around the lens cover. Wipe lens cover area with a
clean, dry towel prior to attempting to remove the lens cover.
Allow the oven to cool before running Self Clean. Always wipe out loose soils or
heavy spillovers before running Self Clean. If oven is badly soiled, set oven for the
maximum Self Clean time.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbl54Hbl55Hbl56Hbl57Hbn54Hbn56

Table of Contents