Direct Power Off Function - Panasonic PT-LB20 Operating Instructions Manual

Commercial use
Hide thumbs Also See for PT-LB20:
Table of Contents

Advertisement

Available languages

Available languages

Direct power off function

You can disconnect the power cord during projection or immediately after
use and move the projector. The cooling fan will operate by the internal
power supply to cool down the lamp.
B When this function is used, it may take more time for the lamp to turn back
on again compared to when the lamp cools down with the power cord
connected.
B Do not put the projector in a bag while the POWER button on the
projector is illuminated.
CAUTION
If not using the projector for an extended period of time, disconnect the
power cord plug from the wall outlet.
B If dust builds up on the power cord plug, the resulting humidity may
damage the insulation, which could result in fire.
B This projector continues to draw approximately 4 W of power even when
the power is turned off.
POWER button on the projector
POWER button status
Red
Illuminated
Flashing
Green
Illuminated
Illuminated
Orange
Flashing
The projector is in standby mode and image projection
is possible by pressing the POWER button.
The projector is preparing for projection after the
power has been turned on while the POWER button
on the projector is illuminated red. (After a short
period, a picture will be projected.)
A picture is being projected.
The lamp is cooling down after the power has been
turned off or while direct power off function is
operating.
The projector is preparing for projection after the
power has been turned on while the POWER button
on the projector is illuminated orange. (After a short
period, a picture will be projected.)
Projector status
E
-27
NGLISH

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents