Installation Instructions; Product Specification - Danfoss TP5000 + RF Installation And User Instructions Manual

Please Note:
This product should only be installed by a
qualifi ed electrician or competent heating
installer and should be in accordance with the
current edition of the IEEE wiring regulations.
Product Specifi cation
Thermostat features
Power supply
Memory back-up
Switching action of output relay
Switch rating of relay contact
Transmission frequency (RF model)
Transmitter range (RF model)
Temperature range
Dimensions, mm
Design standard
Rated impulse voltage
Ball hardness test
Control pollution situation
Temperature accuracy
Time accuracy
Important note RF products: Ensure that there are no large metal objects, such
as boiler cases or other large appliances, in line of sight between the transmitter
and receiver as these will prevent communication between thermostat and receiver.
Installation
Instructions
2 x AA/MN1500/LR alkaline cells
1 x SPDT, Type 1B
6(2)A, 10-230Vac
EN60730-2-9 (EN300220 for RF)
GB
TP5000 TP5000-RF
1 min for battery change
N/A 433.92MHz
N/A
5-30°C
110 wide, 88 high, 28 deep
2.5Kv
75°C
Degree 2
±1°C
±1 min.
N/A
N/A
30m max
3