Download  Print this page

Samsung MIM-H02 User & Installation Manual page 8

Hide thumbs

Advertisement

5 . Setting an indoor unit installation option
f Wi-Fi kit is an optional item, therefore Wi-Fi kit usage option(SEG5) is set to 'Disable' as factory default setting . I f you install
the Wi-Fi kit separately, you must set the Wi-Fi kit usage option(SEG5) as shown in the below table to use it normally .
f Input the setting option more than twice .
f For proper operation, reset the power after inputting the option .
❋ Be aware of the fact that Wi-Fi kit will not operate properly if you only install the Wi-Fi kit but don't set the model option .
1) Set the indoor unit installation option by wired remote controller .
Main Menu Sub-menu
In order to check and set the indoor unit installation option code use the wired remote controller and follow the directions
below .
1 . Press the
and
2 . Press the
/
button to select
3 . Press the
/
button to select
screen .
• The first digit represents the page number and the remaining five digits are installation option .
NOTE
• The total option codes are 24 digits . You can set six digits at a time and it is distinguished by page number (0, 1,
2, 3) .
4 . Press the
/
button to set the installation option code in order . Press
CAC WiFi Kit APP_03384A(1).indd 7
Data bit
1 2 3
4
5
6
buttons at the same time for more than 3 seconds and then a Main menu will be displayed .
and then press
and then press
Page number
Option Code
1 2 3 4 5 6
SEG1
SEG2
SEG3
0
Page number
SEG7
SEG8
SEG9
1
Page number
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2
Page number
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Page number
button to enter a Sub-menu setting screen .
button to enter a Indoor unit installation option code setting
button to go to the next page .
SEG4
SEG5
SEG6
SEG10 SEG11 SEG12
7
2012-10-12 오후 3:37:11

Advertisement

Table of Contents
loading

  Related Manuals for Samsung MIM-H02