6 . Press the [Setting Start] tab .
7 . Enter the information of wireless router and press the [OK] tab .
- Required information is; SSID, Security type, Encryption type and Password .
• If you do not know the information of wireless router, check its manual or contact your ISP (internet service
8 . When 'Transfer complete' pop up comes on, press the [OK] tab .
9 . Select [Settings] [Wi-Fi] on your iPhone .
10 . Select the wireless router that you are using, and enter the password .
- When the air conditioner is connected with wireless router correctly, the second LED of Wi-Fi kit (
- After connecting the wireless router with the air conditioner and when the second LED of Wi-Fi kit (
the internet connection status .
11 . After 2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded . At this point,
you can use smart phone to control the system .
• When searching a network by pressing 'AP' button, third LED (
• Supported models are; iphone4, iphone4S . and other models can be added in the future .
CAC WiFi Kit APP_03384A(1).indd 18
) will be on for a maximum of 5 minutes .
) will be On .
) blinks, check
2012-10-12 오후 3:37:14