The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.
Some functions which require a PIN code may not be available.
The product colour and shape may vary depending on the model.
Exits the menu when pressing the controller more than 1 second.
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you
press it first, you cannot operate it to move the up/down/left/right directions.
Remote control sensor
Do not leave your TV in standby mode for long periods of time(when you are away on a holiday, for example). A small amount of electric
power is still consumed even when the power button is turned off. It is best to unplug the power cord.
The initial setup dialog appears when the TV is first activated.
Follow the on-screen instructions to finish the initial setup process, including menu language choice, channel scan and more.
At each step, either make a choice or skip the step.
Users can manually perform this process at a later time under the System > Setup menu.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN
number, use the Change PIN function.
You should do Setup
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
Using the TV's Controller (Panel Key)
→ System) again at home although you did in shop.
→ 8 → 2 → 4 POWER(on).
Selecting the Media Play
Selecting the Menu
Selecting a Source
The image is drawn by facing the front side
of the TV.
English - 7
Press : Select
Press & Hold:Exit