Advertisement
SPECIFICATIONS
Physical Dimensions
Size: 14. 5 cm x 7.2 cm x 3 cm (5.7" x 2.85" x 1.2")
Weight: 176 grams (6.2 oz.) with battery and remote
Environmental
Operating temperature: 0 to 50°C (32 to 122°F)
Storage temperature: –10 to 60°C (14 to 140°F)
Humidity: 10% to 90%, non-condensing
Battery Life (9V Alkaline battery, typical): times are for the full
capacity of the battery used continuously in one of
the following modes — Standby: 2.5 years
Cable Testing: 120 hours
Cable Types: Shielded or unshielded, Cat-5E, Cat-5, Cat-4, Cat-3
and Coax
Minimum cable length for testing for split pairs: 1 meter (3 feet)
Minimum cable length for PRE-TEST: 1.25 meter (4 feet)
Length measurement range (CAT5/6): 0 to 762 meters
(0 to 2500 feet)
Coax Cable: 100 ohms maximum DC resistance,
center conductor plus shield
--10--
WARRANTY
Test-Um Inc. guarantees to the end-user purchaser that
its products will be free of all defects in material and/or
workmanship. This warranty extends for a period of 12 months
for the test instrument and 3 months for the cables, from the
date of manufacture or proof-of-purchase. The obligation of
Test-Um Inc. under this warranty is limited to the repair or
replacement (at our option) during the warranty period of any
part that proves to be defective in material or workmanship
under normal use, installation and service, provided the product
is returned to Test Um Inc. freight prepaid. Products returned
to us must be accompanied by a copy of the purchase receipt.
In the absence of such a receipt, the warranty period will cease
12 months from the date of manufacture. This warranty does
not extend to products that have been subjected to neglect,
accidental or improper use, or to units which have been altered,
repaired, or inspected by other than Test-Um Inc authorized
personnel. In no event will Test-Um Inc. be liable for any
incidental or consequential damages .
Test Equipment Depot
testequipmentdepot.com
800-517-8431
781-665-0780 FAX
--11--
SERVICE
™
The LanRoverPRO
is designed and manufactured to provide
trouble-free service. However, if for some reason your test set
should require repair, please follow these instructions.
Shipping
1. Before returning any product to Test-Um Inc., you must first
request a Return Goods Authorization Number by contacting
our Customer Services Dept. at 805-383-1500. No shipments
will be accepted without this number, which must be clearly
marked on the shipping label.
2. Ship the equipment with a copy of the sales receipt,
if available.
3. Attach a description of the operational problem.
4. Include a contact name, phone number, and e-mail address
(if possible).
5. Pack securely to prevent damage during shipping.
6. Ship prepaid to:
Test-Um Inc, 808 Calle Plano, Camarillo, CA 93012
Warranty Service
All units returned for warranty repair will be repaired or replaced
free of charge, at the discretion of Test-Um Inc, and will be
shipped freight prepaid. In the event that a sales receipt or other
dated proof-of-purchase documentation is not available, a period
of not more than 12 months from date of manufacture shall apply.
Non-Warranty Service
Damaged units returned for non-warranty repairs will be
inspected and an estimated repair cost forwarded by phone or
mail. Once an approval of these costs is received, the unit will
be repaired. Charges for service and return freight will be
invoiced on a C.O.D. basis with the unit.
--12--
Advertisement
