Rider Seat; Helmet Holder - Yamaha 2011 Star XV250A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Rider seat

To remove the rider seat
Remove the bolts, and then pull the rid-
er seat off.
4
1. Bolt
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
EAU14220
1. Projection
2. Seat holder
2. Place the rider seat in the original
position, and then tighten the bolts.
TIP
Make sure that the rider seat is properly
secured before riding.

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key. WARNING! Never ride with a
helmet attached to the helmet hold-
er, since the helmet may hit objects,
causing loss of control and possibly
an accident.
4-9
EAU14282
[EWA10161]