Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha 2004 XVS1100AS Owner's Manual

1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
PERIODIC MAINTENANCE AND MINOR REPAIR
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
ECA10660
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
1. Screw
XVS1100
1. Screw
6-31
screws.
EAU24281
6