Camera Mounting Adapter - Panasonic aw-e350p Operating Instruction

Lens mount
2/3˝ Standard bayonet type (B4 mount) lens
(AW-E750)
1/2˝ Standard bayonet type (B4 mount) lens
(AW-E655, AW-E650)
1/3˝ C mount lens (AW-E350)
One of the lenses listed above or a microscope
adapter is installed on this mount.
Lens fixing ring knob
(AW-E750/AW-E655/AW-E650 only)
Rotate the lens fixing ring knob counterclockwise
and remove the lens mount cap. Mount the lens
on the camera and rotate the lens fixing ring knob
clockwise in order to fix the lens securely.
Mic jack (AW-E655 only)
This is a ø3.5 mm mic jack which supports PLUG IN
POWER. Use the microphone which has more than
1 kj of impedance, unbalanced.
Mounting hole (AW-E750/AW-E655 only)
To install the camera on a wall or ceiling or to use
a pan/tilt head or tripod, secure the unit using this
screw hole (1/4-20UNC) or using the accessory
mounting adapter.
Furthermore, attach the drop-prevention wire into
these screw holes, using the mounting screws for
wire (Inch screw: 1/4-20UNC).
Cooling fan (AW-E750/AW-E655 only)
The cooling fan can be set to "Auto" or "OFF" on the
menu.
Wire mounting hole (AW-E650/AW-E350 only)
When mounting the camera using the bottom panel,
attach the drop-prevention wire to this hole using the
mounting screw for wire (M4) that is supplied.

Camera mounting adapter

When mounting the camera onto an on-site
mounting bracket, pan-tilt head, or tripod, install this
adapter onto the bottom panel of the camera. This
is a part that is supplied so refer to page 20 for its
installation.
- 14 -