Panasonic CF-T2 Series Operating Instructions Manual page 25

Reference Manual
The Reference Manual is
not displayed
SD Memory Card
For Hong Kong
Cannot log on with the SD
memory card
Fast User Switching Function
Some applications may not
work properly
Others
Computer hangs
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run the following*
program. When installing the program, do not change the installation destination folder.
If the destination folder is changed, the Reference Manual cannot be opened from [start]*
menu.
1
* English : [c:\util\reader\m\acroreader51_enu_full.exe]
Traditional Chinese : [c:\util\reader\tc\acroreader51_cht_full.exe]
Simplified Chinese : [c:\util\reader\sc\acroreader51_chs_full.exe]
Windows 2000
* 2 [
: Start]
If you change the setting for Language for non-Unicode programs after the check
mark has been added in [Use when logging on to Windows] under [SD Card Settings]
- [Setting for this SD card], remove the check mark from [Use when logging on to Win-
dows] under [SD Card Settings] - [Setting for this SD card], and set the user name and
password again.
( "SD Memory Card/MultiMedia Card")
Windows XP
When switching to a different user with the Fast User Switching function, the following
problems may occur. In this case, log off all logged in users, and try the operation once
more. If the problem persists, restart the computer.
• Some applications may not work properly.
• Key combination with Fn may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN can not be used.
Press Ctrl + Shift + Esc to open Windows Task Manager and close the software
application which is not responding.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
Windows XP
: [start] - [Control Panel] - [Add or Remove Programs]
Windows 2000
: [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
1 2
in [start]* - [Run] to reinstall the
2
25