Table of Contents
Advertisement
Available languages
Available languages
WORK
HOURS
DATE OR N° OF HOURS
1.
MACHINE
1.1 Check of tight fixing and
25
sharpness of blade
1.2 Blade replacement
100
1.3 Check of the
25
1)
transmission belt
1.4 Transmission belt
–
1)
replacement
1.5 Checking the
25
1)
blade drive belt
1.6 Blade drive belt
–
1)
replacement
1.7 Check and adjustment
10
of brake
1.8 Check and adjustment
10
of drive
1.9 Check blade
10
engagement and brake
1.10 Check of tight fixing
25
of all the elements
1) 2)
1.11 General lubrication
25
2.
ENGINE
3)
2.1 Check oil level
–
4)
2.2 Engine oil change
100
4)
2.3 Oil filter replacement
–
3)
2.4 Check
and cleaning
50
5) 6)
of air filter
6)
2.5 Air filter replacement
200
1)
2.6 Check fuel filter
200
1)
2.7 Fuel filter replacement
–
2.8 Check and cleaning
100
of spark plug points
2.9 Replacement of spark
200
plug
1)
Contact your Dealer.
2)
General lubrication should be carried out whenever the machine
is to be left unused for a long period.
Check each time used.
3)
4)
Operation to be performed also after the first 20 hours of opera-
tion.
5)
Carry out maintenance of the air filter more frequently in the ca-
se of use on dusty ground.
6)
Replace the paper element only.
LAYING ON ITS SIDE
In order to easily reach beneath the machine, it can be turned onto
its side after having removed the grass-catcher and completely
emptied the fuel tank.
This operation is to be performed with the
WARNING!
as sistance of another person.
Having put the machine onto a firm
and flat surface, engage the parking
brake, put the cutting deck into posi-
tion «7», firmly grip the steering wheel
and the seat, and turn the machine
onto its right hand side so that it rests
on the grass-catcher (as shown), ta -
king care not to damage plastic parts.
Make sure that
WARNING!
the machine is stable before
starting any work and do not car -
ry out work that may cause it to
fall.
17 EN
Hide quick links:
Advertisement
Chapters
Table of Contents
