1. Turn the key switch to "ON", check
the amount of fuel by fuel gauge.
2. Fill fuel tank when fuel gauge shows
1/4 or less fuel in tank.
3. Use grade No.2-Diesel fuel at tem-
peratures above -10°C (14°F).
IMPORTANT
Do not permit dirt or trash to get
into the fuel system.
Be careful not to let the fuel tank
become empty, otherwise air will
enter the fuel system, necessi-
tating bleeding before next en-
gine start.
Be careful not to spill during
refueling. If should spill, wipe it
off at once, or it may cause a fire.
To prevent condensation (water)
accumulation in the fuel tank, fill
the tank before parking overnight.
NOTE
No.2-D is a distillate fuel of lower vola-
tility for engines in industrial and heavy
mobile service. (SAE J313 JUN87)
Grade of Diesel Fuel Oil According to
ASTM D975
Flash Point,
Water and Sediment,
°C (°F)
volume %
Min
Max
52 (125)
0.05
Distillation
Viscosity Kinematic
Temperatures, °C(°F)
2
cSt or mm
/s at 40°C
90% Point
Min
Max
Min
282 (540)
338 (640)
1.9
PERIODIC SERVICE 12-5
Carbon Residue on, 10
percent Residuum, %
Max
0.35
Viscosity Saybolt,
sulfur,
SUS at 100°F
weight %
Max
Min
Max
Max
4.1
32.6
40.1
0.50
Ash,
weight %
Max
0.01
Copper
Cetane
Strip
Number
Corrosion
Max
Min
No.3
40
Need help?
Do you have a question about the CK20 and is the answer not in the manual?