Operations; Installing The Batteries - Yamaha YAS-201 Owner's Manual

Operations

Installing the batteries

1
3
2
Operating range of the remote control
Point the remote control at the remote control sensor on the
sound bar and remain within the operating range shown below.
TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME
TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME DTS D PL SUBWOOFER
Within 6 m (20 ft)
HINT
• You can check the status of the sound bar (such as wireless connection
and volume) by the indicators on the front panel of the sound bar during
operations.
8
En
Remote control signal transmitter
Transmits infrared signals.
Input keys
Select an input source to be played back.
TV key ................... TV audio
BD/DVD key .......... Audio from the playback device
YIT key .................. Audio from the iPod or PC connected to
(Example: when TV is selected)
TV BD/DVD
HINT
• To play audio of the playback device connected to the TV or to watch
videos of the playback device, set the TV's input source to the playback
device.
• For details on playback operations using a transmitter (sold separately),
refer to the manuals of the transmitter.
Supported Yamaha Wireless Transmitter for iPod (as of June 2012)
• YIT-W10
D
DTS PL SUBWOOFER • YIT-W12
INPUT – VOLUME + SUBWOOFER keys
Adjust the volume of the subwoofer.
Volume down (–)
VOLUME keys
Adjust the volume of the sound bar.
Volume down (–)
LEARN key
Sets the sound bar to the TV remote control learning mode (p.10).
connected to the BD/DVD input jack
the transmitter (sold separately)
YIT
Volume up (+)
Volume up (+)
REPEATER key
Enables/disables the TV Remote Repeater function (p.11).