RCA RTS7630B User Manual page 4

CONNECTIONS
CONNECT AUdIO ThROUGh AN ANAlOG AUdIO CABlE
1. Connect an Audio Cable (not included) from the AUX IN jacks to the AUDIO OUT jacks of your TV, Set-Top
Box or Blu-ray/DVD Player.
2. Connect a 3.5mm Audio Cable (not included) from the LINE IN jack to the AUDIO OUT jacks or from the AUX
IN jacks to the Headphone Out jack of your TV, Set-Top Box or Blu-ray/DVD Player.
CONNECT AUdIO ThROUGh A dIGITAl OpTICAl CABlE
3. Connect an Optical Cable (not included) from the OPTICAL IN jack to the OPTICAL OUT jack of your TV, Set-
Top Box or Blu-ray/DVD Player.
EN
Note: OPTICAL IN only supports PCM signal. You may need to activate PCM (Downmix) on your source device,
e.g. TV, Set-Top Box or Blu-ray/DVD Player.
Plug one end of a 3.5mm Audio Cable (not included)
into the LINE IN jack and other end into your iPad®,
iPhone®, iPod® or other audio devices.
plACEmENT
The Soundbar can be placed freestanding on a table or mounted on a wall.
plACING ThE SOUNdBAR ON A wAll
The Soundbar requires additional mounting hardware
that must be purchased separately.
1. Install the Wall Mount Brackets to the Soundbar as
shown.
2. Place the Wall Mount Template (included) on the
wall and then mark the locations of the screw
holes.
3. Drill the screws (not supplied) into the wall
carefully.
4. Gently hang the Soundbar onto the screws in the
wall.
Note: Allow 2mm space between screw and the wall
for fitting the wall mount bracket.
CAUTION:
• We recommend that Wall-mounting be carried out
by a professional. The wall mount bracket "key-
holes" are intended for use with #8 (Imperial) or
M4 (Metric) with head size: Diameter 7.5 - 9.4
mm. Additional or alternative parts may be needed
for certain types of wall constructions.
• Make sure that the wall-mount is fixed securely
4
enough so that it meets safety standards.
• Allow at least 2" (5 cm) separation in all directions
between the Sound Bar and other AV equipment
(such as your TV or Set-Top Box).
• It is recommended that all cables (AC adapter
and Audio cables) be connected to the Sound Bar
before placing it on the wall.