Clock; Childproof Lock; Switching On The Childproof Lock; Switching Off The Childproof Lock - Siemens HB84K.52B Instruction Manual

0
Press the button.
5.
N y
The arrow is next to
ready is displayed.
@ A
Use the or button to set a later end time.
6.
†
Press the button.
7.
The setting is adopted. The oven is in standby and begins the
operation at the correct point. The display shows the time at
V 0
which the meal will be ready and the
symbol. The and symbols go out. When the oven starts,
x
the cooking time counts down in the display and the
next to the symbol. The
The cooking time has elapsed
0
A signal sounds. The oven stops heating. 0:00 is shown in the
@ A
display. Press the button. You can set a new cooking time
using the or button. Or press the
the function selector to the off position. The oven switches off.

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.

Switching on the childproof lock

No cooking time should be set and the function selector must
be in the zero position.
@
Press and hold the button for approx. four seconds.
@
The symbol appears in the display. The childproof lock is
activated.

Switching off the childproof lock

@
Press and hold the button for approx. four seconds.
@
The symbol on the display goes out. The childproof lock is
deactivated.

Childproof lock with automatic programmes

When automatic programmes have been set, the childproof
lock is not operational.
. The time when the meal will be
N
arrow is next to the
N
y
symbol goes out.
0
button twice and turn
Changing the end time
@
Use the or
0
seconds, the change is adopted. If the timer has been set, first
press the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
A
Use the button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
clock, press the
to the relevant symbol. The display shows the value for a few
seconds.

Clock

0
After the appliance is connected or following a power cut,
the symbol and three zeros are lit in the display. Set the
clock.
0
Press the
1.
The time 12:00 is shown in the display.
@
Use the or
2.
After a few seconds, the time that has been set is adopted.
y
Changing the clock
No other time-setting option should have been set.
0
arrow is
Press the
1.
The time symbols light up in the display and the 0
next to .
@
2. Use the or
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
A
button to change the end time. After a few
button twice. Do not change the end time if the
0
button twice.
N
V
x
0
timer, cooking time,
button repeatedly until the
button.
A
button to set the clock.
button four times.
A
button to change the clock.
arrow.
0
y
N
end time or
arrow is next
N
arrow is
11