Sharp AE-Z40KR Service Manual page 43

b) Remove the tube cover.
• Insert the (–) screwdriver to A hole and then lean it to the
right as lifting B part.
c) Remove the evaporator from the cabinet.
• Take off the catch of the tube cover from the plate and move
the evaporator upward.
c
A
B
14)Lift the bottom part of the side cover R and remove the side cover
R.
15)Loosen the screw of cross flow fan and separate the cross flow fan
and the fan motor.
Screw
Catch
Screw
catch part
side cover R
5 – 3
When assembling them, insert the motor shaft in the boss of the
cross flow fan to the ring position.
Ring
16)Take off the catch of guide R from cabinet and remove the guide.
17)Remove the plasmacluster holder from the cover while taking off
the both sides catches of the cover. (For the models with plasma-
cluster).
18)Take out the plasmacluster unit from the holder after taking off the
catch of it. (For the models with plasmacluster)
19)For the models with the auto horizontal adjustment function.
Remove the 2 screws and take out the louver motor V assemblies.
• Remove the louver motor cover after taking off the catches of it.
louver motor cover
AYZP40KR
catch part
side cover R
louver motor base