Anti-Lock Brake System (Equipped Models)
ABS Solenoid Valve Relay Inspection (Service
Front Seat (see Front Seat Removal in the Frame chap-
Check the ABS solenoid valve relay fuse (20 A) [A] (see
Fuse Inspection in the Electrical System chapter).
If the fuse is good, check the wiring continuity that relates
to the LG lead in the main harness referring to the ABS
System Wiring Diagram.
Special Tool - Hand Tester: 57001-1394
Wiring Continuity Inspection
ABS Hydraulic Unit
LG Lead [C]
If there is not the continuity in the lead, replace or repair
the main harness.
If there is the continuity in the lead, go to next stemp.
Recheck the service code indication; erase the service
code, perform the pre-diagnosis inspection 1 and 2, and
retrieve the service code.
If the ABS indicator light (LED) [A] lights, the ABS hy-
draulic unit has trouble. Replace the ABS hydraulic unit.
If the ABS indicator light (LED) does not light, ABS system
is normal (service code is not stored; temporary failure.).
Front, Rear Wheel Rotation Difference Abnormal
(Service Code 25)
Check the following and correct the faulty part.
Incorrect Tire Pressure
Tires not recommended for the motorcycle were installed
(incorrect tire size).
Deformation of Wheel or Tire
Missing Teeth and Clogging with Foreign Matter of Sen-
sor Rotor (see Wheel Rotation Sensor Inspection)
If the all parts correct, recheck the service code indica-
tion; erase the service code, perform the pre-diagnosis
inspection 1 and 2, and retrieve the service code.
Fuse Box Terminal [B]