Throttle Body Assy
Idle Speed Inspection/Adjustment
Refer to the Idle Speed Inspection/Adjustment in the Pe-
riodic Maintenance chapter.
Refer to the Engine Vacuum Synchronization Inspection
in the Periodic Maintenance chapter.
Throttle Body Assy Removal
Gasoline is extremely flammable and can be ex-
plosive under certain conditions, creating the
potential for serious burns. Make sure the area is
well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
light. Do not smoke. Turn the ignition switch OFF.
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
Never drop the throttle body assy, especially on a
hard surface. Such a shock to the body assy can
Lower Fairing (see Lower Fairing Removal in the Frame
Air Cleaner Housing (see Air Cleaner Housing Removal)
Fuel Hose (see Fuel Hose Replacement in the Periodic
Intake Air Pressure Sensor #1 Connector [A]
Intake Air Pressure Sensor #2 Connector [B]
Subthrottle Valve Actuator Connector [C]
For California and Southeast Asia Models, pull off the vac-
uum hose [D].
Main Throttle Sensor Connector [A]
Subthrottle Sensor Connector [B]
FUEL SYSTEM (DFI) 3-125