Table of Contents
Advertisement
Manual
Manually enter the time. Set
time and date. When
Clock Set
to enter the current time and date.
Sleep Timer
Screen Menu >
System
This function automatically shuts off the TV after a preconfigured period of time. You can set the timer
up to 180 minutes in 30 minute increments.
On Timer
Screen Menu >
System
Set the On Timer so that the TV turns on automatically at a chosen time. Only three On Timer settings
can run concurrently. The clock must be set for the On Timer to work.
●
Setup: Specify the dates and duration. Use
●
Time: Specifies the on time.
●
Volume: Specifies the volume when the TV turns on.
●
Source: Selects a signal source from the list. Specify a channel or source to be displayed when
the TV turns on. To specify a USB device, a USB device must first be connected to the TV. To
playback media from an HDMI or Component source such as a DVD player or Blu-ray player, the
device must already be turned on and playing the media when the TV is turned on.
●
Antenna: Set
Source
●
Channel: Set
Source
●
Music
/ Photo: Set
files. Selecting both music and image files plays the music files and displays the images at the
same time.
"
This feature will not function properly if the selected USB device does not contain media files or a folder
has not been specified.
"
The slideshow will not start if there is only one image file on the USB device.
"
Folders with long names cannot be selected.
"
Always use different folder names for multiple USB devices.
"
Use a USB memory stick or multi-card reader.
devices, MP3 players, or PMPs because the TV may take too long to recognize the device.
Clock Mode
Country
is set to
Others
>
Time
>
Sleep Timer
>
Time
>
On Timer
to
TV
to select a broadcast signal.
to
TV
to select a channel.
Source
to
USB
to specify a USB device folder containing music and image
to
Manual
and then select
and
Digital TV System
Try Now
Try Now
Manual
to specify the days of the week.
On Timer
may not work with certain battery-powered USB
Clock Set
to enter the current
is set to
Analog
only, select
Advertisement
Table of Contents
