Table of Contents
Advertisement
●
10p White
Balance: Adjusts the white balance by adjusting the brightness of the red, green, and
blue elements in 10-point intervals. This option is only available when
Movie
and may not be supported by some external devices. This function is only available on the
LED 6400 series and higher.
●
Gamma: Adjusts the primary color intensity.
●
Expert
Pattern: Displays picture calibration patterns on the screen without using a separate
pattern generator or filter.
calibrating the color and color saturation. If the screen menu disappears or a different menu is
activated while the screen is being calibrated, this option will save the changes up to that point
and automatically deactivate that menu. This feature is enabled in Component and HDMI modes
only. This function is only available on the LED 6400 series and higher.
●
Motion
Lighting: Adjusts the picture brightness depending on the on-screen movements for
reduced power consumption. This feature is only available when
and is not available in 3D mode. In addition, adjusting
deactivates this feature.
Pattern1
is used to calibrate the contrast, and
Try Now
Try Now
Contrast
or
Picture Mode
Pattern2
is used for
Picture Mode
is set to
Brightness
automatically
is set to
Standard
Advertisement
Table of Contents
