Table of Contents
Advertisement
11
Set
Network type
Select your network type.
Network type
21
Select
Stop
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Connection verification cancelled.
Wired network connection test is stopped.
Change Network
31
From the
IP Settings
Gateway, and the
IP Settings
IP Setting
IP Address
Subnet Mask
Gateway
DNS Setting
DNS Server
OK
41
The TV attempts to connect to the network again using the specified settings. A confirmation
message is then shown once a connection is established. Select
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact the Internet service provider (ISP).
to
Wired
and then select Connect.
Network Settings
Wired
Connect
IP
Settings.
Network Settings
IP Settings
Retry
screen, set
IP Setting
DNS Server
values, and then select OK.
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
Plug a network cable into
the back of your TV.
Close
to
Enter
manually, enter
IP
Address,
Subnet
OK
to proceed.
Mask,
Advertisement
Table of Contents
