Attaching A Cable Lock; Viewing And Changing Security Settings In The Setup Utility Program - Lenovo thinkcentre M700 User Manual

Attaching a cable lock

A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the device
cables to your computer. The cable lock connects to the cable-lock slots on the rear of your computer.
To install a cable lock, do the following:
1. Insert the clip 1 into the cable-lock slot
2. Pull the cables you want to lock through the dents in the cable lock.
3. Press the clip 2 into the cable-lock slot
Figure 8. Installing a cable lock

Viewing and changing security settings in the Setup Utility program

To view and change security settings in the Setup Utility program, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 33.
2. Select Security.
3. Follow the instructions on the right side of the screen to view and change security settings. You can
refer to "Using the Setup Utility program" on page 33 to get basic information about some major
security settings.
4. Exit the Setup Utility program. See "Exiting the Setup Utility program" on page 36.
30
ThinkCentre M700 User Guide
4 .
3 until it snaps into position.