Other Features; Set Alarm Timer - Philips AH6000/37 User Manual

5 Other features

Set alarm timer

In standby mode, you can set two alarms to ring
at different time.
Note
•
Make sure that you have set the clock correctly.
1
Rotate the Third Knob to SET AL1 or SET
AL2 to activate alarm setting mode.
» The /
2
Rotate the First Knob to adjust the hour.
3
Rotate the Second Knob to adjust the
minute.
4
Press OK on First Knob to confirm.
5
Rotate the Third Knob to CLOCK after
setting.
Select alarm source
For alarm sound, you can select buzzer, or your
last listened radio chanel.
Tip
•
If FM is selected as the alarm source and the unit is
playing under FM mode, buzzer will sound when alarm
time comes.
9 EN
and time digits blink.
BUZZ
Activate/deactivate alarm timer
Note
•
Make sure that the Third Knob switched to CLOCK
before setting.
•
This clock radio do not have 24H alarm reset function.
Press AL1/AL2 to activate the alarm timer if you need
repeats ringing for the next day.
Press AL1/AL2 to activate or deactivate the
alarm timer.
» The / appears if alarm timer is on
and disappears if it is off.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
ALARM
1 2